Industry updates & technical guides about clear plastic boxes and UV printing. Learn packaging produ
Clear PET and PVC cylinder tubes are widely used display packaging for jewelry, toys, stationery, cosmetics, gifts and food accessories. The tube body is mainly made by two mainstream processes: glue bonding and ultrasonic welding. Tube ends are divided into straight flat end and rolled rim. Common lids include blister cap, rolled rim plastic cap and tin lid. Below is the introduction of working principle, advantages, disadvantages and suitable applications.

After rolling the sheet into a cylinder, special adhesive (PVC solvent glue or PET UV glue) is applied on the overlapping seam. The adhesive cures to join the two plastic overlaps. PET mostly uses UV glue cured by UV light; PVC can use solvent glue or slow-dry glue.
✅ Advantages:
Low equipment cost, flexible for small orders and various sizes, fast sampling
Thin invisible seam, compatible with thin, thick and printed tubes
No welding mark, perfect for high-grade full-print transparent tubes
Support extra-large diameter and custom irregular sizes, not limited by ultrasonic mould
❌ Disadvantages:
Risk of glue whitening, overflow and glue marks affecting clarity
Longer curing time, slower production speed than ultrasonic welding
Poor temperature resistance; glue may soften and separate under high temperature
Chemical residue concern for food-grade and clean-room packaging Application: Small & medium runs, printed tubes, low-cost gift packaging, large diameter or special-shaped cylinders.
Ultrasonic equipment generates heat through high-frequency vibration at the overlapping seam. The plastic melts instantly and fuses under pressure, forming an integrated tube without glue. PVC is easier to weld stably; PET requires precise parameters and moulds, otherwise cold joint or cracking may occur.
✅ Advantages:
Glue-free, no chemical residue, suitable for food, cosmetic and premium clean packaging
Fast forming, one seam finished in one second for mass production
High seam strength, tear-resistant, stable under high & low temperature, hard to separate
Clean surface without glue overflow, stable yield, not easy to crack after long storage
❌ Disadvantages:
High cost of machine and ultrasonic mould; new mould needed for new size, high sampling cost for small orders
Visible welding line on the seam
Thick PET, laminated film or heavy ink printed tubes tend to have weak welding and crack
Less flexible for frequent size changes and special small batches Application: Mass production, food contact packaging, export premium packaging, long-term stacking and heavy shipment.
Selection tip: Choose glue bonding for small orders, printed tubes and invisible seam; choose ultrasonic welding for bulk orders, food grade and eco-friendly strong joints.
The tube is cut straight without heat rolling. The edge is sharp. Features: Simple processing, lowest cost; normally matched with blister cap by inner plug fit. Drawbacks: Sharp edge may scratch hands; tube end is easy to deform and crack under pressure, poor support, not for repeated opening. Suitable for: Disposable packaging, short low-cost tubes, products not taken out frequently.
The tube edge is heated and folded inward by mould to form a smooth round rim, single-side or double-side rolled rim. PET needs higher rolling temperature (100–120℃), PVC lower (60–80℃). Improper temperature causes whitening and cracking. ✅ Advantages: Smooth safe edge, no scratch; better rigidity, anti-deformation; stable positioning for rolled rim cap and tin lid, reusable opening, higher grade. ❌ Disadvantages: Extra rolling process increases cost; thin sheet easily wrinkles and cracks during rolling; tiny diameter tubes hard to roll. Suitable for: Premium gifts, repeated opening, tin lid matching, high-touch packaging.
Made by PET/PVC/PS blister forming, inner plug or outer buckle type. Most common match for flat end tubes. Features: Simple structure, low price, fast delivery; transparent, frosted or colored available; plug into flat tube directly. Weakness: Moderate sealing, easy to loose and deform under pressure. Common combination: Glue bonded flat tube + blister cap, most popular cost-effective solution.
Same plastic material with rolled rim on cap edge, interlock with rolled rim tube end. Features: Tight fit, not easy to fall off; consistent transparent appearance; better sealing than blister cap, reusable. Limit: Only works with rolled rim tubes; strict tolerance requirement for roundness of rolled rim, poor fit if tolerance out of range.
Stamped tinplate lid with inner curled edge, matched with rolled rim plastic cylinder. Features: Premium metal texture, strong compression resistance, good dustproof sealing; printable and gold/silver plated; firm lock for safe shipment. Drawbacks: Higher cost than plastic caps; accurate tube rolled rim required; heavier weight; risk of rust in wet or acid/alkali environment. Application: Tea, candy, aromatherapy, cultural creative gifts and premium cylinder packaging.
Glue bonding + Flat end + Blister cap: Best cost performance, widely used for toys and small accessories
Glue bonding + Rolled rim + Rolled rim cap: High-end transparent set for small & medium orders, preferred for printed tubes
Ultrasonic welding + Rolled rim + Tin lid: Food grade, export premium gift box, long storage and heavy transport
Ultrasonic welding + Flat end + Blister cap: Mass clean packaging, glue-free requirement